STACK MODELifting & contouring
Focuses energy on a target area down to the deeper layers, for a lifting and contouring effect
- Method
- Stamping
- Depth
- Up to 4–6mm
LIFTING · TIGHTENING · BRIGHTENING
Three wavelengths for facial contour and skin condition at once
Alma Korea AmbassadorSeol In-ah
Why Titanium
Why Titanium?
A facial contour rarely blurs for just one reason.
Dull skin, weight under the jaw, deeper sagging — usually it is a mix of these.
That is why Titanium uses three wavelengths.
Each reaches a different depth, so each addresses something different.
The whole face, evenly. The areas that bother you, once more.
755nm810nm1064nm
3 - Wavelength
Three wavelengths at once, three effects together
Each wavelength reaches a different depth, delivering heat evenly from the epidermis through the dermis to deeper tissue. This can encourage collagen remodelling across the skin, so natural firmness and a lifting effect may be expected.
755nmLifting
810nmTightening
1,064nmBrightening
Customizing Lifting
One device, three modes
A customisable lifting programme: three modes designed around each person's skin depth and goal.
SHR MODETightening & brightening
Delivers energy across the whole treated area down to the dermis, for immediate tightening and a brightening effect
- Method
- In-motion
- Depth
- Up to 2–3mm
G-SHR MODESkin condition care
Delivers energy more immediately to the upper layers of the skin, supporting brightening and tightening
- Method
- In-motion Linear
- Depth
- Up to 1–2mm
Analysis System
We read the cause first, then divide the area
Lifting is not about choosing a device — it is about reading a face.
Mark-Vu, Meta-Vu and ultrasound imaging show the skin condition and facial structure,
then we separate the areas to cover evenly from those to focus on again.
From there we design the area, the energy, the tip and the number of shots.
- 01Hear the concern
We start with the area that bothers you most in the mirror.
- 02Assess the skin
We look at the skin surface and, where needed, the structure beneath it.
- 03Map the areas
Considering skin thickness, fat layer, muscle and salivary glands, we separate areas to focus on from areas to approach carefully.
- 04Design the plan
We divide even coverage from focused work, then set the area, energy, tip and number of shots.
Why Beautystone
The same Titanium, used differently
A higher kJ is not necessarily better for every face.
Whether the whole face is covered evenly, or the cheeks and jawline get a second pass,
the same energy is put to different use.
At Beautystone we first check the skin condition and facial contour,
then map out where to pass evenly and where to concentrate.
V LINE, FULL FACE, POWER and HYPER are not simply tiers —
they are chosen according to the face and the areas of concern.
What matters is not how many kJ you received, but where on your face they went and how.
New Hyper Titanium
Introducing Hyper Titanium
Broad where it should be broad, precise where it should be precise
Hyper Titanium covers the whole face evenly with the large 4cm² tip,
then works the mouth area and jawline once more with the small 2cm² tip.
What matters is not how many kJ you received,
but where on your face, and with which tip, the plan was drawn.
Hover over a marker to see the areaTap a marker to see the area
Target Area
We do not treat the whole face the same way
How far to go and where to pass again — that is what changes the coverage.
kJ is only the total energy delivered; the number alone does not decide the outcome.
Design Protocol
The same Titanium, a different plan
We do not pass over the whole face the same way, and where to go again differs from person to person.
- STEP 1We look
We image the skin with Mark-Vu and Meta-Vu; the degree of sagging and the weight under the jaw are checked by our medical staff in person.
- STEP 2We decide
Together we decide what comes first — the facial contour or the skin condition.
- STEP 3We map
We map the full-face coverage separately from the focus areas. The energy needed is decided here.
- STEP 4We divide
Broad areas evenly; the spots that bother you, once more.
- STEP 5We record
After soothing care we go through the aftercare notes, and record this session's coverage and skin response for next time.
TRC Certificate
Every session ends with a certificate
The Titanium TRC certificate is issued when genuine Alma equipment is used and the prescribed treatment principles are followed.
It records which mode was used today and how many kJ. A new one is issued each visit, so over time it becomes your own treatment history.
Certificate tiers are based on the total energy delivered.
A higher tier is not better for every face — it depends on the coverage that is actually needed.
Q & A
Start with what you want to know
These are the questions we hear most often about Titanium Lifting. A treatment plan can be built for each person, taking facial contour, skin firmness, tone and condition into account together.
It may suit those whose facial contour has just begun to blur, or who want to manage mild sagging of the cheeks and jawline together with their skin condition. If treatments with significant pain or downtime feel like too much, or you prefer a relatively natural change, it can also be considered after a consultation.
STACK mode is applied by stamping and can be used for lifting and contouring the facial line. It may reach depths of up to 4–6mm. SHR mode works in motion and can be used for tightening and brightening. It may reach depths of up to 2–3mm. G-SHR mode works in-motion linear and is used for skin condition care. It may reach depths of up to 1–2mm. The mode and coverage actually used may vary with your skin condition and the goal of the treatment.
kJ is a measure of the total energy used in the treatment. More energy does not always lead to a better result; what matters is how that energy is distributed between the whole face and the focus areas. Even at the same kJ, the areas treated and the modes used may differ according to face shape and skin condition.
Hyper Titanium is a dual-tip programme that uses the 4cm² tip and the 2cm² tip together. The 4cm² tip covers broad areas such as the cheeks and the whole face; the 2cm² tip can then finish areas needing finer work, such as the mouth area, marionette lines and jawline.
How long results last and the recommended interval are not the same for everyone. Our medical staff will advise you individually after reviewing your skin condition, previous treatments, the energy used and the area covered.
Temporary warmth, redness or sensitivity may appear after the treatment, and this varies from person to person. Please tell our medical staff about any medication you are taking and your skin condition before the treatment, and follow the aftercare instructions given by the clinic.
Ultherapy, Thermage, Sofwave and Onda can each differ in how they are applied, the nature of their energy, the skin layers they address and their purpose. So rather than assuming one device suits everyone, we weigh the degree of sagging, the amount of fat, skin firmness, and tolerance for pain and downtime, then consider a single or combined approach.
With deep sagging, a large amount of fat, or when fine lines and loss of firmness are the main concern, Titanium Lifting alone may not achieve the change you are hoping for. In that case we can review your skin condition and facial structure, then consider combining it with another lifting treatment.
Quick Summary
Titanium Lifting at a glance
How long results last varies with skin condition and the area treated. We will advise a recommended interval at your consultation.
- Duration
- About 20–60 min
- Interval
- Every 6–12 months
- Anaesthesia
- Cream, nerve block, sedation
- Method
- Three wavelengths at once Full face + focus
- Comfort & downtime
- Continuous surface cooling Little disruption to daily life
- Concerns addressed
- Facial contour · firmness Skin condition
A good fit if you
- Notice your facial contour beginning to blur
- Are bothered by mild sagging of the cheeks and jawline
- Want to work on firmness and a dull look at the same time
- Would rather avoid treatments expected to be painful
- Cannot clear your schedule for a recovery period
- Have an important date ahead — a shoot, a wedding, an interview
In these cases we look at other options too
- When sagging has progressed deep beneath the surface
- When a larger amount of fat makes the facial contour look heavy
- When loss of firmness and fine lines are the main concern
Titanium alone may not be enough.
With Titanium
Several causes call for several approaches
The right lifting treatment depends on what concerns you.
If the jawline has clearly dropped
Ultherapy PRIME takes on the deeper layer.
If fine wrinkles have become noticeable
Thermage FLX takes on skin firmness.
If thin skin makes you cautious
Sofwave takes on the shallower layer.
If a double chin is what bothers you most
Onda tidies up under the jaw.
How Beautystone thinks about lifting — in our columns
Understanding the device alone is not enough for lifting. Skin thickness, facial structure that differs by gender, the choice of tip for each area and the treatment coverage — all of it together is what lets you decide the lifting direction that fits your face. See how Beautystone approaches lifting — start with our columns.
A treatment is defined less by the device
than by how the face is read.
Your face deserves the lifting that fits it
Rather than repeating the same treatment,
start by understanding your own skin and facial contour.
Beautystone will work through the right lifting plan with you.
※ For every treatment, the coverage, recovery and results may differ according to each person's skin condition and facial structure.
Beautystone Clinic
Visit Beautystone.
365 Days Care.
Beautystone cares for your skin health
365 days a year.
